department web page: www.uta.edu/ee/
department contact: EEdept@uta.edu
Jonathan W. Bredow
518 518 Nedderman Hall
M.S., M.Engr., Ph.D.
Thesis, Thesis Substitute and Non-Thesis
506 Nedderman Hall, 817.272.2671
504 Nedderman Hall
Alavi, Bredow, Butler, Carter, Celik-Butler, Devarajan, Kirk, Kondraske, Lee, Lewis, Manry, Prabhu, Rao, Shoults, Stephanou, Yeung
Chiao, Davis, Dillon, Engels, Oraintara, Tao, Tjuatja
Fahimi, Gou, Iqbal, Jung, Liang, Lu, Popa, Vasilyev, Wang, Xiao, Zhou
Gibbs, Kenarangui, Russell, Stelmakh, Svihel
Chen, Fitzer, Fung, Smith, Spradlin
The course offerings provide the student with an opportunity to broaden as well as to intensify his or her knowledge in a number of areas of electrical engineering. The student, with the aid of a faculty adviser, may plan a program in any one of a number of fields of specialization within electrical engineering or from the offerings of related departments in science and engineering.
Graduate study and research are offered in the areas of:
The program is designed to satisfy the needs of students pursuing master's and doctoral degrees and to provide for the student seeking to increase knowledge in areas of electrical engineering related to engineering practice. The courses offered will provide practicing engineers with advanced, up-to-date education in electrical engineering.
The admission process considers all of the application material including official transcripts, GRE scores, letters of recommendation and the statement of purpose. No single objective factor is used to finalize the decision for admission or to deny admission. An attempt will be made to match the technical aspirations of the potential graduate students with the departmental resources in order to provide a stimulating academic environment for the students and their graduate education.
Criteria concerning (1) unconditional, (2) provisional, (3) deferred, (4) denied and (5) fellowship, are given below:
Master's degree requirements are described in the general catalog section titled Requirements for the Master's Degree/Degree Plans and Hours Required. The MSEE degree options available are thesis option, thesis substitute option and non-thesis option. The courses taken for all degrees must be distributed over four of the eight areas given in the Objective section. The MSEE program of work in electrical engineering may include up to nine graduate level semester hours of supporting courses outside the Electrical Engineering Department in math, science and engineering. The Graduate Advisor must approve supporting courses that are permitted on a degree plan. The courses approved outside electrical engineering may be used in lieu of one of the four distribution areas. The thesis option requires 24 semester hours plus six semester hours of thesis (EE 5698). The thesis substitute option requires 30 semester hours of which three semester hours must be in the thesis substitute project (EE 5392). The non-thesis option requires 36 semester hours. EE 5391 may not be used to satisfy course requirements in either the Thesis or Thesis-substitute degree plans. EE 5391 may be used one time as part of the non-Thesis degree plan. EE 5191 may not be used toward the MSEE or MENGR degrees. The M.Engr. emphasizes design engineering and management. This program requires 36 semester hours distributed in the same manner as the MSEE program, except that up to 12 semester hours outside the department may be included.
The Ph.D. is a degree with emphasis on research. Requirements for the doctoral degree are described elsewhere in the general catalog section on Degree Offerings/Requirements. Permission to continue beyond the master's degree will be based on the grade point average and GRE scores as described above. Approval to continue in the doctoral program is given by satisfactory completion of the following procedure:
The course requirements for the Diagnostic Examination should be completed during the M.S. degree or during the first 30 graduate hours required for entrance into the Ph.D. program. If the student is required to take some of the Technical Proficiency Courses in order to take the Diagnostic Exam, these hours will be in addition to the required advanced level course specified later.
This procedure must be completed within the year of coursework toward the Ph.D. A student not having attempted the Diagnostic Examination by this time will be allowed one more opportunity to take the examination during the next full semester.
The program of work is expected to include a minimum of 18 semester hours of advanced graduate level coursework beyond the master's degree and sufficient dissertation semester hours as required to complete the dissertation. The supervising professor may require additional coursework beyond the 18 hour minimum if deemed necessary to accomplish the research required for the dissertation. These courses may include graduate level mathematics, science, or engineering relevant to the student's dissertation program, but only with approval of the Graduate Advisor.
The status of a doctoral candidate is approved for students who have passed an oral Comprehensive Examination (a comprehensive dissertation proposal) and submitted a Final Program of Work. The Comprehensive Examination will be required by the time the student has completed the required coursework. If the student fails the examination, he/she would be given one more chance to pass it no later than during the following semester. Upon completion of the Comprehensive Examination, the candidate should enroll in the dissertation course (EE 6399, EE 6699, or EE 6999) continuously until defense of the dissertation. The last semester the student must be enrolled in EE 6999. This ordinarily requires approximately 30 semester hours of dissertation credit.
The Electrical Engineering Graduate Program, in fulfillment of its responsibility to graduate highly qualified engineers, has established certain policies and procedures. In addition to the requirements of the Graduate School listed elsewhere, to continue in the program each electrical engineering graduate student must maintain at least a B (3.0) GPA in all electrical engineering coursework and at least a B (3.0) GPA in all coursework for M.S. students. A student working toward a Ph.D. must maintain a 3.5 GPA in all electrical engineering coursework and at least a 3.5 GPA in all coursework.
The grade of R (research in progress) is a permanent grade; completing course requirements in a later semester cannot change it. To receive credit for an R-graded course, the student must continue to enroll in the course until a passing grade is received.
An incomplete grade (the grade of I) cannot be given in a course that is graded R, nor can the grade of R be given in a course that is graded I. To receive credit for a course in which the student earned an I, the student must complete the course requirements. Enrolling again in the course in which an I was earned cannot change a grade of I. At the discretion of the instructor, a final grade can be assigned through a change of grade form.
Three-hour thesis courses and three- and six-hour dissertation courses are graded R/F/W only (except social work thesis courses). The grade of P (required for degree completion for students enrolled in thesis or dissertation programs) can be earned only in six- or nine-hour dissertation courses and nine-hour thesis courses. In the course listings below, R-graded courses are designated either "Graded P/F/R" or "Graded R." Occasionally, the valid grades for a course change. Students should consult the appropriate Graduate Advisor or instructor for valid grade information for particular courses. (See also the sections titled "R" Grade, Credit for Research, Internship, Thesis or Dissertation Courses and Incomplete Grade in this catalog.)
MSEE students must take courses from four Technical Areas. Non-thesis students must take one technical proficiency course from each of three areas, and earn at least a 3.3 GPA in those three courses.
Technical Proficiency Courses
1. Digital and Microprocessor/Controller Systems
EE 5313 - Microprocessor Systems
2. Solid State Devices, Circuits and Systems
EE 5305 - Advanced Electronics
3. Systems, Controls and Automated Manufacturing
EE 5307 - Linear Control Systems Theory
4. Electromagnetic Fields and Applications
EE 5306 - Electromagnetic Theory
5. Digital Signal and Image Processing
EE 5302 - Random Signals and Noise
6. Telecommunications and Information Systems
EE 5360 - Data Communication Engineering
7. Power Systems and Industrial Power Electronics
EE 5308 - Power System Modeling and Analysis
8. Optical Devices and Systems
EE 5380 – Principals of Photonics and Optical Engineering
9. Nanotechnology and MEMS – Materials and Devices
EE5443 – Silicon IC Fab Technology
EE5190 - ELECTRICAL ENGINEERING GRADUATE SEMINAR (1 - 0)
Topics vary from semester to semester. May be repeated for credit. Graded F, P. Prerequisite: graduate standing or consent of the department.
EE5191 - ADVANCED STUDY IN ELECTRICAL ENGINEERING (1 - 0)
Individual research projects in electrical engineering. Prior approval of the EE Graduate Advisor is required for enrollment. A written report is required. Graded F, P, R.
EE5301 - ADVANCED ENGINEERING ANALYSIS (3 - 0)
Analytical and numerical techniques for solving various types of engineering problems. Topics include matrix reduction by Gaussian elimination, similarity transformation, singular value decomposition, Jordan normal form, etc. Analysis techniques include Fourier series and transforms, fast Fourier transform, discrete convolution, complex analysis, least squares, and others.
EE5302 - RANDOM SIGNALS AND NOISE (3 - 0)
Probability, random variables, and stochastic processes in physical systems. Topics include probability space, discrete and continuous random variables, density and conditional density functions, functions of random variables, mean-square estimation, random signals, system response, optimum system design, and Markov processes.
EE5303 - ENGINEERING MANAGEMENT (3 - 0)
The management of the engineering function in high-technology industry with principal emphasis on the historical development of industrial management principles, decision-making, and planning.
EE5304 - NETWORK SYNTHESIS (3 - 0)
Introduction to network synthesis of circuits using lumped, linear, passive, and operational amplifiers. Topics include realizability theory, synthesis of driving point impedances and two port circuits, passive and active filters, and Hilbert Transforms.
EE5305 - ADVANCED ELECTRONICS (3 - 0)
Advanced study of solid-state devices and integrated circuits. Analysis, design and simulation of analog integrated circuits including biasing, gain stages, active loads, power amplifiers, operational amplifiers and wideband amplifiers.
EE5306 - ELECTROMAGNETIC THEORY (3 - 0)
Advanced study of electromagnetic theory, its content, methods, and applications. Topics include theorems in electromagnetic theory, cylindrical and spherical wave functions, waveguides, integral equation methods, scattering and diffraction.
EE5307 - LINEAR SYSTEMS ENGINEERING (3 - 0)
Topics include state-space description of dynamic systems, analysis and design of linear systems, similarity transformation, state feedback, state observers, and matrix characterization of multivariable systems.
EE5308 - POWER SYSTEM MODELING AND ANALYSIS (3 - 0)
Fundamental concepts for modeling transmission lines, distribution lines, power system generators, power transformers and power system load. The method of symmetrical components is discussed. Simulation of power systems during normal and abnormal conditions are presented. The philosophy of deregulation regarding separation of power systems into generation, transmission and distribution companies is introduced.
EE5309 - TOPICS IN ELECTRICAL ENGINEERING (3 - 0)
Material may vary from semester to semester. Topics are selected from current areas of electrical engineering interest. May be repeated when topic changes.
EE5310 - DIGITAL VLSI DESIGN (3 - 0)
Introduction of VLSI digital circuit design methodology and processing technology. Application of various design software packages for circuit analysis and layout. Design of basic CMOS digital logic circuits. Implementation of digital logic design at the transistor level.
EE5311 - VLSI SIGNAL PROCESSING ARCHITECTURES (3 - 0)
Design and synthesis of DSP and telecommunication systems using integrated modeling, design, and verification tools. Exploration of high-level architectural transformations that can be used to design families of DSP architectures for a given signal processing algorithm. Prerequisite: EE 5350.
EE5312 - CMOS RFIC DESIGN (3 - 0)
Transceiver design for wireless communications using advanced CMOS technology. Emphasis on full-custom chip design, RFIC design concepts. Transceiver architectures. Topics include low noise amplifier, mixer, oscillator, frequency synthesizer, and power amplifier. A project is required, including design, simulation and layout using an IC design tool. Prerequisite: EE 5305 or EE 5318.
EE5313 - MICROPROCESSOR SYSTEMS (3 - 0)
Hardware/software development techniques for microprocessors and their programmable peripherals, with emphasis on multi-byte width memory design, throughput issues including DMA controller design, co-processor operation, interrupt-driven i/o, oscillators and timer peripherals, analog signal interfacing, and digital buses and interfaces. Topics include: code efficiency issues, hardware-software interactions, and design of memory systems, DMA controllers, and real-world interfacing.
EE5314 - EMBEDDED MICROCONTROLLER SYSTEMS (3 - 0)
Hardware/software development techniques for microcontroller systems with emphasis on hardware-software interactions, programming internal peripherals, and real-time control and conditioning of external devices. Other topics include: code efficiency, pin reuse, interrupt-driven processing, USART operations, 12C and SPI bus peripherals, and use of internal peripherals.
EE5315 - DSP MICROPROCESSORS (3 - 0)
Device architectures and various aspects of hardware/software design will be presented for dominant families of function-specific, application-specific and general-purpose digital signal processors (DSPs) from leading manufacturers. Special attention will be given to problems related to real-time acquisition and processing of analog data (audio, video, RF, etc.), including design principles for the state-of-the-art data conversion interfaces. Prerequisite: EE 5313.
EE5316 - CMOS MIXED SIGNAL IC DESIGN (3 - 0)
Design of CMOS mixed signal ICs with emphasis on full custom chip design. Comparators, switched-capacitor circuits, converter architectures, analog-to-digital converters, digital-to-analog converters, integrator-based filters. A project is required, including design, simulation and layout using an IC design tool. Prerequisite: EE 5305 or EE 5318.
EE5317 - ADVANCED DIGITAL VLSI DESIGN (3 - 0)
Design of logical gates using CMOS technologies; static and dynamic circuit techniques; advanced techniques in logic circuits; general VLSI system components design; arithmetic circuits in VLSI; low power design; chip layout strategies. A design project using computer tools is required. Prerequisite: EE 5310.
EE5318 - ANALOG CMOS IC DESIGN (3 - 0)
CMOS analog IC design and layout issues; CMOS current mirror and opamp design; noise analysis and modeling; comparators, sample-and-holds and voltage references; switch-capacitor circuits. Prerequisite: EE 5305.
EE5319 - TOPICS IN DIGITAL SYSTEMS (3 - 0)
Formal instruction in selected topics in digital systems and microcomputers. May be repeated when topic changes.
EE5320 - CONTROL SYSTEM DESIGN (3 - 0)
Design, analysis, and computer simulation of digital and continuous control systems. Controller design using classical techniques and modern state-variable techniques, including linear quadratic regulator, polynomial, and observer design. Discrete systems and Z-transform theory. Use of high-level computer programs in system analysis and design will be emphasized.
EE5321 - OPTIMAL CONTROL (3 - 0)
Design of optimal control systems. Topics include optimization under constraints, linear quadratic regulators, Ricatti equation, suboptimal control, dynamic programming, calculus of variations, and Pontryagin's minimum principle. Prerequisite: EE 5307.
EE5322 - INTELLIGENT CONTROL SYSTEMS (3 - 0)
Principles of intelligent control including adaptive, learning, and self-organizing systems. Neural networks and fuzzy logic systems for feedback control. Mobile robots. Discrete event systems and decision-making supervisory control systems. Manufacturing work-cell control. Advanced sensor processing including Kalman filtering and sensor fusion. Prerequisite: EE 5307.
EE5323 - NONLINEAR AND ADAPTIVE CONTROL (3 - 0)
Design of nonlinear and adaptive systems. Topics include phase planes, Lyapunov's theory, describing function, feedback linearization, parameter estimation, self-tuning, and model reference adaptive systems. Prerequisite: EE 5307.
EE5324 - DESIGN OF DIGITAL CONTROL SYSTEMS (3 - 0)
Sampling and data reconstruction. Z-transforms and state variable descriptions of discrete-time systems. Linear quadratic optimal control and state estimation. Quantization and other nonlinearities. Real-time control systems. Digital feedback control systems. Constructing discrete-time mathematical model system. Analysis of system behavior using discrete-time model and evaluation of the system performance. Discrete controller design techniques such as root locus, frequency response, and state space techniques. Evaluation and testing of system performance using digital simulations. (Also listed as AE 5380 and ME 5380).
EE5325 - ROBOTICS (3 - 0)
Principles of kinematics, dynamics, and control of robot manipulators and mobile robots. Analysis of dynamical equations and design of robot control systems using modern nonlinear systems techniques. Computer simulation of robotic and mobile robot systems. Path planning, workcell coordination and control. Robot languages and programming. Also listed as ME 5337.
EE5326 - FUZZY LOGIC (3 - 0)
Introduction to fuzzy logic system (FLS) systems theory, design, and applications. Topics include fuzzy logic and crisp logic, fuzzy rules and interference, fuzzification, defuzzification, non-singleton FLS, type 1 and type 2 FLS, TSK FLS, applications to signal processing, telecommunications, control, and decision making.
EE5328 - INSTRUMENTATION AND MEASUREMENT (3 - 0)
Measurement principles and design of sensor and measurement systems. Topics include computer-based measurement systems, sensor design, signal conditioning, data acquisition, smart sensors, and mechatronics. Techniques for measuring quantities encountered in robotics and automation, manufacturing, biomedical, and other applications.
EE5329 - TOPICS IN SYSTEMS (3 - 0)
Formal instruction in selected topics in systems engineering, such as advanced controls, systems performance, graphics subsystems design, robotics, and computer vision. May be repeated when topic changes.
EE5331 - MICROWAVE SYSTEMS ENGINEERING (3 - 0)
Topics include frequency planning, design and performance analysis of transmitter and receiver circuits for communications and radar. Emphasis is on design using commercially available mixers, amplifiers, oscillators, and modulation circuits. Analysis includes receiver noise figure, distortion and path loss effects.
EE5332 - ANTENNA SYSTEM ANALYSIS (3 - 0)
Fundamental study of antennas and antenna design techniques. Topics include numerical analysis of wire antennas; aperture antennas; geometrical theory of diffraction; horns and reflector antennas; and antenna synthesis and measurements. Prerequisite: EE 5306.
EE5333 - WIRELESS AND CELLULAR PROPAGATION (3 - 0)
Fundamentals of VHF, UHF, and microwave propagation. Propagation over irregular terrain. Propagation in built-up areas. Propagation modeling and prediction tools. Multipath phenomena. Signal statistics. Prerequisite: EE 5302 and EE 5306.
EE5334 - FUNDAMENTALS OF RADAR REMOTE SENSING (3 - 0)
Active and passive remote sensing systems, platforms for remote sensing, radar equation, interaction of electromagnetic wave with matter, radar cross section, scattering from area extensive targets, surface scattering, volume scattering, radiative transfer theory, radar data collection and analysis, retrieval of target parameters.
EE5335 - FUNDAMENTALS OF RADAR IMAGING (3 - 0)
Radar system, antenna system, radar equation, electromagnetic waves scattering from targets, radar signal and noise, detection and extraction of signal from noise or clutter, range and Doppler profiles, radar image formation, real aperture radar imaging, SAR imaging, ISAR imaging, image distortion, superresolution radar imaging techniques.
EE5336 - ELECTROMAGNETIC INTERFERENCE AND COMPATIBILITY (2 - 1)
Fundamentals principles involved in grounding and shielding, proper layout of high-speed digital circuitry, reducing crosstalk, conducted and radiated interference mechanisms, electromagnetic compatibility (EMC), electrostatic discharge (ESD), objectives and techniques to apply a systematic problem solving approach to replace "trial and error" methods. Circuit construction and measurement.
EE5337 - FABRICATION AND MEASUREMENT OF MICROWAVE CIRCUITS (3 - 0)
Experimental techniques used in measuring circuits at high frequencies as well as fabrication of microwave circuits using photo lithography. Prerequisite: EE 5347 or EE 5348.
EE5339 - TOPICS IN ELECTROMAGNETICS (3 - 0)
Formal instruction in selected topics in electromagnetics. May be repeated when topic changes.
EE5340 - SEMICONDUCTOR DEVICE THEORY (3 - 0)
Quantum mechanics applicable to semiconductor theory. Energy band theory, density of states and effective mass theory. Intrinsic and extrinsic semiconductors, equilibrium statistics for electrons and holes. Transport, generation and recombination of excess carriers. Device equations and physics. Theory and performance of p-n and Schottky diodes, bipolar and MOS transistors.
EE5341 - ELECTRONIC MATERIALS: FUNDAMENTALS AND APPLICATIONS (3 - 0)
Fundamental theory required for the study of electronic materials: waves and particles, quantum mechanics, crystal structures, chemical bonds, and band theory. Materials and properties considered will be metals, semiconductors, and dielectrics including effective mass, doping, and carrier statistics, and electronic, dielectric, magnetic, and optical properties of materials as applied to integrated circuits, wireless communication, optoelectronics, optical communication, and data storage.
EE5342 - SEMICONDUCTOR DEVICE MODELING AND CHARACTERIZATION (2 - 3)
Device models and characterization procedures for the pn junction and Schottky diodes, the BJT, JFET, MOSFET, HBT, and optical sources and detectors. SPICE derived and higher level circuit simulator models will be presented. Prerequisite: EE 5340 or EE 5341.
EE5343 - SILICON INTEGRATED CIRCUIT FABRICATION TECHNOLOGY (2 - 3)
Basic integrated circuit fabrication processes: crystal growth (thin film and bulk), thermal oxidation, dopant diffusion/implantation, thin film deposition/etching, and lithography. Introduction to process simulators, such as SUPREM. Fabrication and characterization of resistors, MOS capacitors, junction diodes and MOSFET devices. Prerequisite: Pass the NanoFAB Safety and Clean Room Protocol test.
EE5344 - INTRODUCTION TO MICROELECTROMECHANICAL SYSTEMS (MEMS) AND DEVICES (3 - 0)
Develops the basics for microelectromechanical devices and systems including microactuators, microsensors, and micromotors, principles of operation, different micromachining techniques, and thin-film technologies as they apply to MEMS.
EE5345 - SEMICONDUCTOR DEVICE AND PROCESS SIMULATION (2 - 3)
Analytical simulation theory and applications. Device simulation of pn junctions, bipolar junction transistors and MOS devices. Process simulation of oxidation, ion implantation and diffusion. Prerequisite: EE 5340.
EE5346 - MICROWAVE DEVICES (3 - 0)
Device physics and applications of microwave semiconductor devices and vacuum tubes. Topics include operation, modeling and characterization of MESFETs and HEMTs, microwave diodes, and microwave vacuum tubes. Prerequisite: EE 5340 and EE 5341.
EE5347 - MICROWAVE CIRCUITS (3 - 0)
Theory of microwave circuit design; techniques include use of Kuroda identities, Richard's transformation, and ABCD parameters; topics include design of couplers, transformers, filters, and resonators in coaxial lines, strip lines, and microstrip. EE 5348.
EE5348 - RADIO-FREQUENCY CIRCUIT DESIGN (3 - 0)
Design of lumped-element radio-frequency circuits operating at frequencies to 2 GHz. Impedance-matching, s-parameter design of amplifiers and oscillators, RF mixers. Other topics include noise theory (thermal and phase noise) and phase-locked loops. Prerequisite: EE 5305.
EE5349 - TOPICS IN INTEGRATED CIRCUIT TECHNOLOGY (3 - 0)
Formal instruction in selected topics in integrated circuit technology. May be repeated when topic changes.
EE5350 - DIGITAL SIGNAL PROCESSING (3 - 0)
Time and frequency domain analyses of linear time invariant systems. Stability analyses of causal and non-causal systems using the Z-transform. FIR digital filter design. Design of frequency selective IIR digital filters using frequency transformations and the bilinear transform. Design of infinite and finite impulse response filters.
EE5351 - DIGITAL VIDEO CODING (3 - 0)
Fundamentals, principles, concepts and techniques of data compression such as Huffman, Lempel-Ziv, Arithmetic, Facsimile, Transform, DPCM, VQ, and Hybrid coding and applications in ITU, ISO, and IEC standards related to audio, video, and image compression.
EE5352 - STATISTICAL SIGNAL PROCESSING (3 - 0)
Estimation of autocorrelations and cross-correlations; estimation of power spectral densities using the DFT; AR modeling and Wiener filter design; Toeplitz recursion; maximum likelihood estimation and minimum mean square estimation. Prerequisite: EE 5350 and EE 5302.
EE5353 - NEURAL NETWORKS (3 - 0)
Introduction to feedforward and local neural networks. Training algorithms including back- propagation. Metrics for evaluation of neural network and conventional network performance. Applications in classification, estimation and forecasting. Prerequisite: EE 5350 or concurrent registration.
EE5354 - WAVELETS AND FILTER BANKS (3 - 0)
Fundamentals of signal decomposition, discrete multirate systems and polyphase structures. Time-frequency analysis and multiresolution signal representation. Two-channel filter banks, dyadic wavelets, and scaling and wavelet functions. M-channel filter banks and their lattice structures. Applications in signal de-noising, compression and communications. Prerequisite: EE 5350.
EE5355 - DISCRETE TRANSFORMS AND THEIR APPLICATIONS (3 - 0)
Principles and properties of discrete transforms such as discrete Fourier, discrete cosine, Walsh-Hadamard, slant, Haar, discrete sine, discrete Hartley, LOT and Wavelet transforms, and their applications in signal and image processing.
EE5356 - DIGITAL IMAGE PROCESSING (3 - 0)
Digital image processing as applied to image sampling and quantization, image perception, image enhancement, image restoration, image reconstruction from projections, and filtering and image coding. Prerequisite: EE 5350.
EE5357 - STATISTICAL PATTERN RECOGNITION (3 - 0)
Elements of statistical pattern recognition systems, including: image pre-processing using order statistic and morphological filters, deformation-invariant feature sets and approximations to Bayes classifiers. Shape recognition using nonlinear classifiers. Prerequisite: EE 5352.
EE5358 - COMPUTER VISION (3 - 0)
Techniques for the interpretation, analysis, and classification of digital images. Methods for segmentation, feature extraction, object recognition, stereo vision and 3-D modeling. A research project will be assigned.
EE5359 - TOPICS IN SIGNAL PROCESSING (3 - 0)
Formal instruction in selected topics in signal processing. May be repeated when topic changes.
EE5360 - DATA COMMUNICATIONS ENGINEERING (3 - 0)
Principles underlying communication network design, including physical layer, MAC layer modeling and engineering, and data link layer. Queuing theory. Internet structure, Internet protocol models and engineering. Physical layer description will include modulation, FEC, cyclic and Trellis coding. MAC layer modeling will include CSMA/CD, ALOHAS, and other splitting algorithms. Prerequisite: EE 5302 and EE 5361.
EE5361 - FUNDAMENTALS OF TELECOMMUNICATION SYSTEMS (3 - 0)
Analysis of analog and digital communication techniques including amplitude modulation, frequency modulation, and pulse code modulation. Time-domain and frequency domain multiplexing. Analog and digital noise analysis, information theory, design of communication systems.
EE5362 - DIGITAL COMMUNICATIONS (3 - 0)
Fundamental principles underlying the transmission of digital data over noisy channels. Basics of source coding techniques including entropy coding, Lempel-Ziv. Channel capacity. Spectral analysis of digital modulation techniques. Optimum receiver design and error probability performance of commonly used modulation schemes. Applications to lightwave and wireless systems. Prerequisites: EE 5302 and EE 5361.
EE5363 - TELECOMMUNICATION SYSTEMS (3 - 0)
Basics of telecommunications and telephone networks. Switching and transmission systems. Circuit and packet switching. Call processing. Common channel signaling systems. Queuing theory and applications. OSI-layered reference architecture. ISDN. Prerequisite: EE 5361.
EE5364 - INFORMATION THEORY AND CODING (3 - 0)
Transmission of information over noisy channels, Shannon's coding theorems, techniques of coding and decoding for reliable transmission over noise channels, error-detecting, and error-correcting codes. Prerequisite: EE 5302.
EE5365 - FIBER OPTIC TRANSMISSION SYSTEMS (3 - 0)
Propagation in optical fibers, characteristics and manufacture of fibers, semiconductor lightwave sources and detectors, optical transmitters and receivers, lightwave transmission systems for wide area and local area networks. Prerequisite: EE 5306 and EE 5361.
EE5366 - COMMUNICATION SATELLITE SYSTEMS (3 - 0)
Introduction of space communications, satellite orbits and their effect on communication system design. Atmospheric propagation effects. Communication link analysis, modulation, multiplexing, multiple access, encoding and forward error correction in satellite links. Design of communication satellites, earth station and their principal subsystems. Prerequisite: EE 5361.
EE5367 - WIRELESS SYSTEMS AND PROPAGATION MODELING (3 - 0)
Fundamental principles and techniques of electromagnetic wave propagation as it applies to current wireless and cellular systems, development of models of propagation and their application in wireless system design, characteristics of microwave devices used in wireless systems, system and traffic design techniques used in wireless systems. Prerequisite: EE 5302.
EE5368 - WIRELESS COMMUNICATION SYSTEMS (3 - 0)
Fundamental principles of radio system design and propagation. Basics of cellular systems, environment, propagation models, traffic models and spectral capacity. Multiple-access techniques including FDMA, TDMA, CDMA. Analog and digital modulation techniques used in wireless communication and problems with RF interference. Prerequisites: EE 5302 and EE 5361.
EE5369 - TOPICS IN COMMUNICATIONS (3 - 0)
Formal instruction in selected topics in communications. May be repeated when topic changes.
EE5371 - POWER SYSTEM PLANNING, OPERATION, AND CONTROL IN A DEREGULATED ENVIRONMENT (3 - 0)
Current market structure and practices are discussed. The issues of system planning, operation, and control in a deregulated environment are addressed. Prerequisite: EE 5308.
EE5372 - CONGESTION MANAGEMENT (3 - 0)
Phenomena of congestion and transmission pricing are presented. Thermal related congestion, such as power flow, and stability related congestion, such as voltage stability, transient stability, and dynamic stability, are covered. The effects of reactive power are discussed. Reliability and security issues of power transmission systems are presented. Congestion management and congestion relief measures are discussed. Prerequisite: EE 5308.
EE5373 - UNBUNDLING SERVICES OF A DEREGULATED POWER SYSTEM (3 - 0)
The fundamental operating functions of a deregulated power system are presented. Unbundling of these functions and cost allocations are discussed. Topics of ancillary services, power marketing, price forecasting, and load forecasting are covered. Prerequisite: EE 5308.
EE5374 - POWER SYSTEM PROTECTIVE RELAYING (2 - 3)
Fundamental understanding of symmetrical components, applications of symmetrical components in system protection, philosophy of power system protection, various protective relay systems, and the special considerations in applying the microprocessor based relays are covered. Experiments utilizing the Power System Simulation Laboratory are required.
EE5375 - POWER SYSTEM DISTRIBUTION (3 - 0)
The basic functions of a Distribution Company are presented. Load representation, distribution load flow and the philosophy of simulation for a distribution system are discussed in detail.
EE5376 - POWER SYSTEM RELIABILITY IN PLANNING AND OPERATION (3 - 0)
Loss of Load indices, Loss of Energy indices, Frequency and Duration methods, Interconnected Reliability methods, and Composite Generation and Transmission Reliability methods will be covered.
EE5377 - PROGRAMMABLE LOGIC CONTROLLERS IN INDUSTRIAL AUTOMATION (2 - 3)
The application of Programmable Logic Controllers (PLC) in industrial automation and energy systems monitoring will be covered. Transducers, Supervisory Control and Data Acquisition (SCADA) systems, and Distributed Control Systems (DCS) will be discussed. Material covered is also applicable to various mechanical and civil engineering fields, thus enrollment of graduate engineering students from other disciplines is welcome. Experiments utilizing the Power System Simulation Laboratory are required.
EE5378 - POWER QUALITY (2 - 3)
Principles of harmonics and filtering, source of voltage surges and surge protection, causes of voltage sags, flickers, and interruptions, and voltage supporting devices, and utility and end-user strategies for improving power quality are covered.
EE5379 - TOPICS IN POWER SYSTEM ENGINEERING (3 - 0)
Formal instruction in selected topics in power system engineering. May be repeated when topic changes.
EE5380 - PRINCIPLES OF PHOTONICS AND OPTICAL ENGINEERING (3 - 0)
Optical fields with applications to laser, optical fibers, and photonic signal processing. Encoding, manipulating, transmitting, storing, and retrieving information using light. Light propagation including isotropic and birefringent optical media, dielectric interfaces, interference and diffraction, Gaussian beams, optical cavities and principles of laser action, optical waveguides and fibers, electro- and acousto- optic modulation, and holography. Design, analysis and application of optical devices in communications and signal processing.
EE5381 - FOUNDATIONS IN SEMICONDUCTORS (3 - 0)
Electronic properties of semiconductors affecting semiconductor devices: quantum behavior; Kronig-Penny model; energy bands; carrier statistics; density of states; one, two, and three dimensional systems; carrier transport; thermoelectric effects; surface and bulk generation-recombination statistics; continuity equations and their solutions; optical properties; semiconductor characterization techniques.
EE5382 - OPTICAL DETECTORS AND RADIATION (3 - 0)
Basic principles of optical detectors used in imaging and communications. The course focuses on infrared detectors. Geometric optics, blackbody radiation, radiometry, photon detection mechanisms, thermal detection mechanisms, noise in optical detectors, figures of merit for detectors, photovoltaic detectors, photoconductive detectors, bolometers, pyroelectric detectors, and quantum well detectors.
EE5383 - SOLAR ELECTRICITY & PHOTOVOLTAICS (3 - 0)
Solar radiation and other forms of renewable energy: wind, tide, biomass and hydropower. Fundamental theory of photovoltaics: crystal structures, band theory, semiconductors, doping, carrier statistics, optical absorption, and p-n junctions. Status of solar cell, including cost, optical design, system engineering, silicon solar cells and thin film solar cells. Prospects of solar cells, regarding low-cost and high-efficiency solar cells. Prerequisite: EE 5340 or EE 5341.
EE5384 - OPTOELECTRONIC DEVICES FOR COMMUNICATION (3 - 0)
Electronic and optical processes in semiconductors. Light emitting diodes. Laser diodes: structures, properties and operating principles. Photodetectors and solar cells. Noise and the photoreceiver. Optoelectronic modulators and switching devices. Systems needs and new device challenges.
EE5385 - NONLINEAR OPTICS (3 - 0)
Nonlinear optical processes and applications in crystals, optical fibers and waveguides. Second- and third- order nonlinear susceptibility, symmetry properties, coupled-wave propagation,phase-matching techniques, sum- and difference-frequency generation, parametric amplification, four-wave mixing, self- and cross-phase modulation, soliton propagation, and Raman scattering. Prerequisite: EE 5380.
EE5386 - INTEGRATED OPTICS (3 - 0)
Theory and techniques of integrated optics including optical waveguiding, coupling, modulation, grating diffraction, detection and integrated systems. Prerequisite: EE 5306.
EE5387 - FOURIER OPTICS AND HOLOGRAPHY (3 - 0)
Theory of Fourier optics and holography including scalar diffraction theory, Fresnel and Fraunhofer diffraction, Fourier transforming properties of lenses, optical imaging systems, spatial filtering, and the theory and applications of holography. Prerequisite: EE 5306.
EE5388 - LASERS (3 - 0)
Propagation of optical rays and waves, Gaussian laser beams, laser resonators, atomic systems, lasing and population inversion, laser amplifiers, practical gas and solid-state lasers including continuous-wave and pulsed lasers, mode locking, Q-switching, frequency doubling, tunable lasers, semiconductor lasers, vertical-cavity lasers and applications of lasers. Prerequisite: EE 5306.
EE5389 - TOPICS IN OPTICS (3 - 0)
Formal instruction in selected topics in optics. May be repeated when topic changes.
EE5391 - ADVANCED STUDY IN ELECTRICAL ENGINEERING (3 - 0)
Individual research projects in electrical engineering. Prior approval of the EE Graduate Advisor is required for enrollment. A written report is required. Graded F,P,R.
EE5392 - PROJECT IN ELECTRICAL ENGINEERING (3 - 0)
Individual research projects performed for fulfilling the requirements of the thesis substitute option. Prior approval of the EE graduate advisor is required for enrollment. A written and oral report is required. Graded F, P, R.
EE5398 - THESIS (3 - 0)
Graded F, R. Prerequisite: Graduate standing in electrical engineering.
EE5698 - THESIS (6 - 0)
Graded F, P, R. Prerequisite: Graduate standing in electrical engineering.
EE6313 - ADVANCED MICROPROCESSOR SYSTEMS (3 - 0)
Study of the advanced microprocessor architectures including 32/64-bit RISC and CISC families of microprocessors will be compared based on detailed architectural analysis of the selected devices. Topics include: address/instruction pipelines, burst cycles, memory caching and cache coherency issues, register renaming, speculative instruction execution and other performance-oriented techniques. Prerequisite: EE 5313.
EE6314 - ADVANCED EMBEDDED MICROCONTROLLER SYSTEMS (3 - 0)
Study of advanced microcontroller system designs with an emphasis on multi-tasking, real-time control of devices. Topics include: design of real-time control systems, programmable logic controller (PLC) hardware, USB peripherals and network appliances. Prerequisite: EE 5314.
EE6318 - ADVANCED ANALOG VLSI SYSTEMS (3 - 0)
Data converter design: Nyquist rate D/A and A/D converters and oversampling converters; continuous time filters; phase lock loops; low power analog circuit design techniques.
EE6340 - INTRO TELE NETW (3 - 0)
EE6341 - FEEDBACK AMPL (3 - 0)
EE6342 - ADVANCED QUANTUM DEVICES (3 - 0)
Advanced concepts in quantum theory of semiconductors. Epitaxial growth and characterization of heterostructures, quantum wells, and superlattices including strained layers; electronic and optical properties of these structures; electronic and optoelectronic devices based on quantum wells and superlattices. Prerequisite: EE 5340 and EE 5341.
EE6343 - QUANTUM WELL LASERS (3 - 0)
Introduction to semiconductor heterostructures and quantum wells. Quantum theory of optical processes and laser operation. Threshold, spectral, and dynamical behavior. Modern laser structures and technologies, including strained-layer and surface emitting lasers. Prerequisite: EE 5340 and EE 5341.
EE6344 - NANOSYSTEMS AND QUANTUM ELECTRONIC DEVICES (3 - 0)
Design, analysis, and techniques for conceptualizing and fabricating nanoscale systems. Role of quantum confinement and mesoscopic behavior, phase coherence, quantum transport, single electron devices, semiconductor heterostructures, self-assembly and molecular electronic schemes, lithographic methods, atomic epitaxy, and surface analysis techniques. Prerequisite: EE 5340 and EE 5341.
EE6345 - ADVANCED MEMS -- MICROELECTROMECHANICAL SYSTEMS (3 - 0)
Microelectromechanical systems (MEMS) and devices including micro-actuators and optical MEMS. Application strategy of MEMS; fabrication and design; actuation mechanism and architectures; optical sensor and communication applications. Mask layout and hands-on design, fabrication procedures, design rules, demonstrated examples, and integration architectures. Prerequisite: EE 5344.
EE6352 - DIGITAL COM SYS (3 - 0)
EE6356 - IMAGE AND VIDEO CODING (3 - 0)
Fundamentals, principles, concepts, and techniques of data (image/video/audio) compression such as Huffman coding, arithmetic coding, Lempel-Ziv coding, facsimile coding, scalar and vector quantization, DPCM, PCM, sub-band coding, transform coding, hybrid coding and their applications. Prerequisite: EE 5350.
EE6360 - DIGI SIGNAL PRO (3 - 0)
EE6362 - ADVANCED DIGITAL COMMUNICATIONS (3 - 0)
Digital communication systems design with intersymbol interference. Partial response signaling. Adaptive equalization. Viterbi decoding. Digital signaling on fading multi-path channels and wireless channels. Applications of error detecting and correction coding. Spread spectrum systems. Prerequisite: EE 5362.
EE6363 - SPREAD SPECTRUM COMMUNICATION (3 - 0)
Direct-sequence spread spectrum systems utilizing pseudonoise (PN) generators. PN sequences and their properties. Maximal length codes, Gold codes. Code acquisition techniques. Phase-locked loops and their applications in carrier tracking and code tracking. Performance of spread spectrum systems in jamming environments. Prerequisite: EE 5362.
EE6364 - ADVANCED DATA NETWORKS (3 - 0)
Network performance analysis, link and upper layer. Internet and ATM protocols, Internet routing and traffic management, ATM switch design and ATM traffic management. Prerequisite: EE 5360.
EE6365 - ADVANCED FIBER OPTICS SYSTEMS (3 - 0)
Laser modulation, design of high speed optical transmitters and receivers. Coherent detection systems, fiber and semiconductor optical amplifiers. Photonic switching, future technologies. Prerequisite: EE 5365.
EE6367 - ADVANCED WIRELESS COMMUNICATIONS (3 - 0)
Performance analysis of cellular systems with multipath propagation, diversity, equalization, smart antennas. Interference compensation and signal separation in multiuser systems. Micro- and pico-cell design. Allocation of channels, hard and soft handoffs. Data transmission on mobile networks. Review of selected current and proposed systems. Prerequisite: EE 5368.
EE6368 - SIMULATION OF COMMUNICATION SYSTEMS (3 - 0)
Simulation methods of analysis of communications systems using C programming language and other languages. Analysis involving atmospheric point-to-point radio and cellular channels and fiber optic systems and their elements. Prerequisite: EE 5362, EE 5368, EE 5365, C, and UNIX.
EE6372 - HIGH VOLTAGE ENGINEERING (3 - 0)
Introduction to design, measurement and testing methods for high voltage systems. A study of electrical insulation materials and their properties, partial discharges and voltage breakdowns, electric field plotting methods, generation of high voltage test pulses, and high voltage measurement techniques.
EE6375 - POWER ELECTRONICS ENGINEERING (3 - 0)
Switched mode DC-DC converters, controlled rectifiers, commutated and resonant inverters. Also, performance evaluation of specific applications by means of state space analysis will be discussed. Prerequisite: Must have consent of instructor.
EE6390 - INTRO WIRE COMM (3 - 0)
EE6397 - RESEARCH IN ELECTRICAL ENGINEERING (3 - 0)
Individually approved research projects leading to a doctoral dissertation in the area of electrical engineering. Graded F, P, R.
EE6399 - DISSERTATION (3 - 0)
Graded F, R.
EE6697 - RESEARCH IN ELECTRICAL ENGINEERING (6 - 0)
Individually approved research projects leading to a doctoral dissertation in the area of electrical engineering. Graded F, P, R.
EE6699 - DISSERTATION (6 - 0)
Graded F, R.
EE6997 - RESEARCH IN ELECTRICAL ENGINEERING (9 - 0)
Individually approved research projects leading to a doctoral dissertation in the area of electrical engineering. Graded F, P, R.
EE6999 - DISSERTATION (9 - 0)
Graded F, P, R.